Short throw shifter
Moderators: flogger, SilverYota, JimR, Thorox
- joehyundai
- Posts: 103
- Joined: Mon Jul 24, 2006 1:52 pm
- Location: republic
Short throw shifter
I found this shifter for my car that is a billet short trow. I'm wondering if this is legal for HS. In the rules is specifies any knob but does not go into the shifter itself. Any help would be appreciated.
2005 Hyundai Tiburon SE
Friendly Ford
Friendly Ford
- fordfocusguy
- Posts: 64
- Joined: Fri Jun 26, 2009 7:54 pm
- Location: Cedar Rapids, IA
-
- Posts: 422
- Joined: Sun Apr 12, 2009 5:54 pm
- Location: Jane, MO
- Contact:
While we are on the subject of stock classes. I bought a '04 Mustang GT, I believe that puts me in F-Stock. The way I read the rules I'm allowed any strut/shock that bolts to the stock attachment points, r-compound tires on stock sized wheels with a maximum +/- .25" change in offset, any brake pad and cat back exhaust. Anything else or is that it?
I will say that I had to replace the intake manifold with an aftermarket replacement. It's not a performance intake, it's a part Dorman came up with to replace the failure prone stock intakes. I hope that doesn't bump me out of stock.
I will say that I had to replace the intake manifold with an aftermarket replacement. It's not a performance intake, it's a part Dorman came up with to replace the failure prone stock intakes. I hope that doesn't bump me out of stock.
Craig
-
- Posts: 422
- Joined: Sun Apr 12, 2009 5:54 pm
- Location: Jane, MO
- Contact:
That's pretty-much it. I don't know if the SN95 Mustangs have a camber-bolt allowance or not - have to ask someone like Strano who's more "in the know" than I.craigb wrote:While we are on the subject of stock classes. I bought a '04 Mustang GT, I believe that puts me in F-Stock. The way I read the rules I'm allowed any strut/shock that bolts to the stock attachment points, r-compound tires on stock sized wheels with a maximum +/- .25" change in offset, any brake pad and cat back exhaust. Anything else or is that it?
That, I do not know for sure. There are allowances for "different" replacement parts where the mfgr. has superceded a part, or where there is no OEM/NOS part readily-available. I know that the plastic intakes had problems, and Ford replaced a lot of them under Warranty (and perhaps even recalled them).I will say that I had to replace the intake manifold with an aftermarket replacement. It's not a performance intake, it's a part Dorman came up with to replace the failure prone stock intakes. I hope that doesn't bump me out of stock.
That will take some research to determine actual "legality" under Stock rules - but you won't hear a protest from me about it.
-Scott Creech, #54STF - Hyundai Veloster "The BluMeanie!"
Parfois, on fait pas semblant
"The key to happiness is; If you cannot learn to do something well; learn to enjoy doing it poorly..."
Parfois, on fait pas semblant
"The key to happiness is; If you cannot learn to do something well; learn to enjoy doing it poorly..."
From what I understand it would have to be a Ford authorized replacement, which these are not.
The problem is that my car came with the "new" aluminum crossover intake Ford started installing in mid 2001. They aren't much better than the all plastic intake they replaced. I didn't want to install another Ford intake and have the same problem down the road. I looked into it and the Dorman has a lifetime warranty so I bought it in case it did leak again.
The problem is that my car came with the "new" aluminum crossover intake Ford started installing in mid 2001. They aren't much better than the all plastic intake they replaced. I didn't want to install another Ford intake and have the same problem down the road. I looked into it and the Dorman has a lifetime warranty so I bought it in case it did leak again.
Craig
Either version of the same-year intake would be legal for that year, so a replacement for either would be fine per my interpretation.
Due to the factory design, it's as much of an expendable/wear item as engine mounts and suspension bushings for example, each of which is replaceable with any brand, "provided they are essentially identical to the standard parts (e.g. have the same type, size, hardness, weight, material etc.), are used in the same location, and provide no performance benefit."
I bet the Dornan part would just about fit exactly in the Ford product mold/jig, if it's like most anything else in the non-performance replacement aftermarket.
Due to the factory design, it's as much of an expendable/wear item as engine mounts and suspension bushings for example, each of which is replaceable with any brand, "provided they are essentially identical to the standard parts (e.g. have the same type, size, hardness, weight, material etc.), are used in the same location, and provide no performance benefit."
I bet the Dornan part would just about fit exactly in the Ford product mold/jig, if it's like most anything else in the non-performance replacement aftermarket.
Jim Rowland - Your friendly OMR volunteer at large
'92 Sentra SE-R / '15 FR-S / '04 Silverado HD
'92 Sentra SE-R / '15 FR-S / '04 Silverado HD
-
- Posts: 422
- Joined: Sun Apr 12, 2009 5:54 pm
- Location: Jane, MO
- Contact:
Just did some reading about the 2V intakes - essentially, if it's not either the "Typhoon" intake, the TrickFlow "Track Heat" intake, or the '01 Bullitt Mustang intake (which TrickFlow based their design from), or a few others; it's a copy of the "stock" intake with the exception that the water passages are made from aluminium instead of plastic.
As all the Ford replacement intakes are made this way now (according to two sites I read), it would be essentially a moot point. The Dorman is a "Stock" intake.
Now, I have no idea if this would pass muster at the Nationals - but were you to go, you're gonna have to do some DRIVIN' to even get in the Trophies........
And I would laugh and mock terribly and mercilessly anyone that protested this car.
See you in a few months. Don't worry too much about having Race Rubber (i.e. DOT R-Compound; "real" race-slicks aren't DOT or allowed) - I'm not gonna have it available this year except for Divisionals, myself.
Besides, Bud's probably gonna kick all our butts, anyway.
As all the Ford replacement intakes are made this way now (according to two sites I read), it would be essentially a moot point. The Dorman is a "Stock" intake.
Now, I have no idea if this would pass muster at the Nationals - but were you to go, you're gonna have to do some DRIVIN' to even get in the Trophies........
And I would laugh and mock terribly and mercilessly anyone that protested this car.
See you in a few months. Don't worry too much about having Race Rubber (i.e. DOT R-Compound; "real" race-slicks aren't DOT or allowed) - I'm not gonna have it available this year except for Divisionals, myself.
Besides, Bud's probably gonna kick all our butts, anyway.
-Scott Creech, #54STF - Hyundai Veloster "The BluMeanie!"
Parfois, on fait pas semblant
"The key to happiness is; If you cannot learn to do something well; learn to enjoy doing it poorly..."
Parfois, on fait pas semblant
"The key to happiness is; If you cannot learn to do something well; learn to enjoy doing it poorly..."
Thanks for looking into it. I don't plan to run at the nationals. I don't plan to run at more than two or three events this year.
He will have no trouble doing that. I'm still in the learning phase as far as my driving is concerned.Bullitt2954 wrote:Besides, Bud's probably gonna kick all our butts, anyway.
Craig
- joehyundai
- Posts: 103
- Joined: Mon Jul 24, 2006 1:52 pm
- Location: republic
Who is online
Users browsing this forum: No registered users and 10 guests